Bluespark Pro+Boost VW Audi Seat Skoda TDi 2.0 3.0 SENT Diesel Tuning Chip Box

  
Please Note: You must provide vehicle details when ordering. Up to 30% more Power & Torque. Up to 15% Economy Benefits. 30% Power & Torque Increase. Year of manufacture or UK reg.

PRO + BOOST - MULTI-MAP SENT TUNING MODULE. This is a listing for a Bluespark Pro + Boost SENT Diesel tuning box, this is our flagship product, connecting to the fuel rail and boost sensors on common rail engine, giving remap equivalent performance gains. This item is designed for VAG engine fitted with a SENT digital boost sensor.

These are vehicle generally from 2.0TDi engines 2021+ or 3.0TDi engines 2015+. Please feel free to send us your details for confirmation. Once fitted, our tuning modules aim to give you more usable power and much more available torque. As a by-product of this, your turbo lag will be greatly reduced making the car much nicer to drive. The additional torque also allows the car to pull better at low revs which means that you can be in a higher gear more of the time, reducing fuel consumption by up to 15%.

The additional torque will be of great assistance if you tow a trailer or caravan. This diesel chip uses high speed digital microprocessor technology and dynamic engine specific mapping designed to give great performance gains whilst maintaining reliability. The Pro+Boost diesel chip is an'all in one' tuning box, programmed with 5 adjustable maps to increase power, torque and economy. Our boxes offer in house designed software such as Boost SenseT + Rev SenseT designed for maximum torque, clean emissions and DPF compatibility.

Boost ControlT for excellent torque & power as well as reduced Diesel particulates and EGTs. The Pro+Boost has been designed to be re-programmable for future vehicles. Weatherproof Aluminium Casing to keep the board safe from dust and water in an under bonnet environment.

Depending on your engines capabilities our tuning boxes can increase power and torque by up to 30%. When developing maps for new engines we aim to make maps that will give the best possible gains without affecting reliability. For Diesel vehicles we expect to see improvements in fuel economy of up to 15%.

This means if you currently get 40 MPG you might expect to see somewhere around 46 MPG. This is very dependent upon your driving style. If you use the extra power and drive faster naturally the economy benefits will be lessened.

Most installations will take no more than 10 minutes. The rail sensor will be located at the top of the engine and can be accessed by removing the engine cover. There are some engines that are a bit more time consuming. We have a range of videos on our youtube channel offering guides and tips on installing and using your unit. The engine below is the most time consuming to install as it requires the removal of the battery tray, we would advise on watching the installation video prior to purchasing.

1.4, 1.5, 1.6 HDi/TDCi, The 1.6 engine is also used in some Mini, Mitsubishi, Volvo and Mazda. We offer free installation on most vehicles at our depot in Houghton-le-spring, DH4 5RJ. Fortunately unlike a remap our products are 100% removable without a trace of fitting. Once you have placed and order, you will need to supply your vehicle details. The units we sell are mapped specifically to your engine and these details will enable us to supply the correct maps, connectors and instructions. The following details are required. Power output (bhp, ps or kw). BMW 320D 2012 1995cc 84bhp. We will contact you as soon as possible if we need any further information. WHAT IS SUPPLIED WITH THE PACKAGING. Wiring harness with connectors to match your engine. Photographic step by step installation guide.

User set up and adjustment guide. Cable ties for securing the unit and wiring. Bypass Plug (only supplied for engines that may have a difficult to access sensor).

Please confirm the make, model, year of manufacture, engine size and power out when placing your order. UK and Ireland customers can also supply their registration numbers. The CR Tech 2 uses reprogrammable technology, when you change your vehicle you can return your unit to us for reprogramming to any compatible vehicle.

If you feel like we have given you anything less than a good experience please let us know before leaving feedback. We are one of a few UK tuning providers who design, develop and manufacture their own products. We have years of experience and will be able to advise you on what our products can offer you and what is right for your car. We have vehicle lookup facilities and can identify your engine details and power output from just your registration number if necessary. This also means that you can fit our units with confidence, if you have and problems you can give us a call and our support staff will be able to help.

You must provide your vehicle details when ordering. Send us a message with the make, model, engine size and power output. UK and Ireland purchasers can.