Intake Pipe joiner 1 x1. MAF to filter silicone hose x1. 1st Heat shield support bracket and hardware x1. Pipercross Performance Foam Air filter x1.
2nd Heatshield support bracket and hardware x1. M6 x 20 hex bolt x2. Description Pipercross Intake Kit PK370 After some extensive development on our Mk6 Golf GTI Pipercross are now pleased to release our new intake kit. Incorporating a full custom made, light weight aluminium heat shield, large open cone filter with full radius spinning, custom Samco Hose and full stage 2 back pipe to turbo. We used our flow bench to test the system throughout the development stage comparing it to the OE unit, we managed to create a system that was up to 45% less restrictive than the OE unit.
First run on a standard car with OE airbox gave a reading of 230bhp, with our kit on we got 232.9 bhp. When then put a stage 1 map on the car as this is where we would see the real gains and as expected we did. OE airbox with map made 250bhp with 292 lb/ft torque, with the Pipercross kit installed we made 263.5bhp and 306.6 lb/ft torque a 13.5bhp gain and 14lb/ft increase!!! About Pipercross Induction Kits Each Pipercross Induction kit is an air intake system designed specifically for your car. Research, development and testing is carried out on every kit to ensure that the product we make performs well, looks fantastic and is easy to fit.
The 150mm outer diameter base we use for Induction kits and Viper intakes create laminar air flow to keep air turbulence to a minimum. Turbulence causes drag which slows the airflow down and limits the flow rate of any induction system.
Air filter units without a full radius edge create turbulence, thus reducing their effectiveness. At the heart of the Pipercross air filter is a specially developed polyurethane foam which acts as the filtration medium, having both higher performance and life expectancy than paper.
Pipercross reticulated foam is created by a chemical reaction - it's placed in a gas filled combustion chamber where a controlled explosion burns away any complete cell walls in the material to form a strictly quality controlled skeletal cellular structure This process, ensures that the foam consists of tiny open cells which trap contaminants to protect your engine against even the harshest of environments without compromising air flow. About Pipercross Pipercross has been making high performance air filters for the motor sport and domestic markets for over 25 years.
Based in Northampton, England, Pipercross is situated in the country along with some of the biggest names in motorsport engine design and manufacture in the world. The item "Vw Golf mk6 2.0 GTI Scirocco TSI Pipercross induction intake air filter kit k&n" is in sale since Thursday, January 23, 2014. This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Air Intake & Induction\Other Air Intake & Induction".
The seller is "haz_motorsport" and is located in GB. This item can be shipped to United Kingdom, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Qatar, Trinidad and tobago, Uruguay, Viet nam, Philippines.